Para Importación DR-70D

Grabador Tascam DR-70D

$266.000 ( Valor referencial )

The DR-70D from TASCAM is the ultimate audio recording solution for filmmakers. Four balanced XLR mic inputs meet the requirements of production sound, from professional users to indie DSLR shooters. The compact format can be mounted either above or below a camera, and a pair of built-in microphones can capture sound on-set. The interface is designed for quick adjustment, with additional features to keep recording levels under control.

Categorías: ,

Leyenda

Stock Inmediato

Disponibilidad Inmediata

Para Importación

A pedido USA (Aprox 2 Semanas y media según disponibilidad) Platillos: (Aprox 3 semanas)

Stock Bodega

A pedido Bodega Stgo (Aprox 1-2 días) Previa Confirmación!

Stock Iquique

A pedido aprox 2 semanas en llegar a Santiago

Características del Grabador Tascam DR-70D

Recording media SDHC card(4GB to 32GB), SDXC card(48GB to 128GB) High speed cards required.                      See the Tested Media List on the DR-70D DOWNLOADS page.
Recording format
WAV 44.1k / 48k / 96k Hz, 16bit / 24bit
BWF 44.1k / 48k / 96k Hz, 16bit / 24bit
Number of channels 4-channel (stereo × 2, mono × 4)
Analog audio input
1/L, 2/R, 3/L, 4/R connectors
Connector XLR-3-31 (1:GND, 2:HOT, 3:COLD) / 6.3mm(1/4″)TRS standard jack
Set to “MIC / MIC+PHANTOM”
Input impedance 2k ohms
Phantom power 48V +/-4V(10mA/CH), 24V +/-4V(10mA/CH)
Maximum input level 0dBu
Minimum input level -72dBu
MIC input gain TRIM MAX
LOW +21dB
MID +36dB
HIGH +51dB
HI + PLUS +63dB
Set to “LINE”
Input impedance 10k ohms or more
Standard input level +4dBu
Maximum input level +20dBu
1/2 connector
Connector 3.5mm(1/8″)stereo mini jack  (this connector can be supplied plug-in power)
Input impedance 10k ohms
Maximum input level +10dBV
Minimum input level -50dBV
MIC input gain TRIM MAX
LOW +3dB
MID +11dB
HIGH +26dB
HI + PLUS +38dB
CAMERA IN connector
Connector 3.5mm(1/8″)stereo mini jack
Input impedance 10k ohms
Standard input level -10dBV
Maximum input level +6dBV
Analog audio output
LINE OUT connector
Connector 3.5mm(1/8″)stereo mini jack
Output impedance 200 ohms
Standard output level -10dBV
Maximum output level +6dBV
CAMERA OUT connector
Connector 3.5mm(1/8″)stereo mini jack
Output impedance 200 ohms
Standard output level -40dBV
Maximum output level -24dBV
PHONES connector
Connector 3.5mm(1/8″)stereo mini jack
Maximum output level 20mW + 20mW
USB
Connector Micro-B type
Format USB2.0 HIGH SPEED mass storage class
REMOTE
Connector 2.5mm TRS jack
Power 4 AA batteries(Alkaline or NI-MH),
USB bus power,
Dedicated AC adapter(TASCAM PS-P515U, sold separately),
Dedicated external battery pack(TASCAM BP-6AA, sold separately)
Power consumption 5.0W
Continuous operation time 2ch WAV, 44.1kHz, 16bit rec
Phantom power not used
DR-70D Battery Life (hours:minutes)
Alkaline batteries (EVOLTA) About 6:00 : When XLR/TRS input selecte (Phantom off)
About 3:30 : When XLR/TRS input selecte (Phantom on)
About 11:00 : When 3/4 MIC (Built-in Mic) selected
NI-MH batteries (eneloop) About 6:15 : When XLR/TRS input selecte (Phantom off)
About 3:15 : When XLR/TRS input selecte (Phantom on)
About 10:30 : When 3/4 MIC (Built-in Mic) selected
NI-MH batteries
(eneloop pro)
About 7:45 : When XLR/TRS input selecte (Phantom off)
About 4:45 : When XLR/TRS input selecte (Phantom on)
About 14:15 : When 3/4 MIC (Built-in Mic) selected
DR-70D + BP-6AA *BP-6AA is using the alkaline batteries (EVOLTA).
Alkaline batteries (EVOLTA) About 13:00 : When XLR/TRS input selecte (Phantom off)
About 7:30 : When XLR/TRS input selecte (Phantom on)
About 25:30 : When 3/4 MIC (Built-in Mic) selected
NI-MH batteries (eneloop) About 12:45 : When XLR/TRS input selecte (Phantom off)
About 7:45 : When XLR/TRS input selecte (Phantom on)
About 24:45 : When 3/4 MIC (Built-in Mic) selected
NI-MH batteries
(eneloop pro)
About 14:30 : When XLR/TRS input selecte (Phantom off)
About 8:45 : When XLR/TRS input selecte (Phantom on)
About 27:00 : When 3/4 MIC (Built-in Mic) selected
Dimensions 6.65(W)×2.2(H)×4.2(D)in
169(W)×55.2(H)×106.5(D)mm
(with the top adapter attached)
Weight 1.37lb ( including batteries) / 1.16lb (without batteries )
625g ( including batteries) / 530g (without batteries )
Operating temperature 0 to 40˚C
Standard accessories USB cable, Camera attachment bracket screw hole covers × 6 Owner’s Manual (including warranty)

 

Audio performance
Frequency response 20-20kHz +0.5/-2dB(LINE IN or MIC IN to LINE OUT, Fs44.1k/48k Hz, JEITA)
20-40kHz +0.5/-3dB(LINE IN or MIC IN to LINE OUT, Fs96kHz, JEITA)
Distortion 0.02% or less(LINE IN or MIC IN to LINE OUT Fs44.1k/48k/96k Hz, JEITA)
S/N ratio 92dB or more(LINE IN or MIC IN to LINE OUT Fs44.1k/48k/96k Hz, JEITA)
Equivalent input noise -120dBu or less

 

Computer compatibility
Windows
OS Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1
CPU Pentium 300MHz or more
RAM 128MB or more
USB recommended: USB2.0
Macintosh
OS Mac OS X Jaguar (V10.2), Mac OS X Panther (V10.3), Mac OS X Tiger (V10.4),
Mac OS X Leopard (V10.5), Mac OS X Snow Leopard(V10.6.8), OS X Lion(V10.7),
OS X Mountain Lion(V10.8), OS X Mavericks(10.9)
CPU Power PC, iMac, G3, G4 266MHz or more
RAM 64MB or more
USB recommended: USB2.0

The DR-70D from TASCAM is the ultimate audio recording solution for filmmakers. Four balanced XLR mic inputs meet the requirements of production sound, from professional users to indie DSLR shooters. The compact format can be mounted either above or below a camera, and a pair of built-in microphones can capture sound on-set. The interface is designed for quick adjustment, with additional features to keep recording levels under control.

Four XLR mic inputs with phantom power are included on the DR-70D, enough to cover busy scenes. The High-Quality HDDA(High Definition Discrete Architecture) Mic Preamps  include 64dB of gain for quiet performances, and all four inputs have individual gain controls. Each input has a limiter and low cut filter available for controlling volume. Also included is Dual Recording mode, which records a safety copy of your audio at a lower level to prevent distorted takes. Quality components like 5532 op amps are used throughout for the clearest audio possible.

Tracks on the DR-70D are captured to SD card, SDHC or SDXC media – up to 128GB cards are supported. The recorder has tripod mounts on the top and bottom of the unit, allowing it to be mounted on a camera, a follow-focus cage, or used standalone. Other production friendly features include a slate tone, low-noise buttons, a powerful headphone output, and standard AA battery power.

Uniquely designed for the needs of filmmakers, television producers, advertisers, and documentarians, the DR-70D packs multitrack recording into a package compact enough to use with any camera.

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “Grabador Tascam DR-70D”

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *